HP Laptop Not Connecting To WiFi Windows 10
HP laptop is not connecting to WiFi issue is one of the general problems which is encountered by the Windows 10 users. This issue appears when the wireless driver is not updated. If the LAN is enabled, then it can also cause this problem. Sometimes, if you have not upgraded the Windows Operating System, then you can face this issue. Most of the Windows 10 users have complained that their Windows 10 computers do not connect to the Wi-Fi networks, even though they have confirmed that the Auto Connect options are turned On for the network. They want to solve this issue immediately. If you are one of those and want to know the solution, then this article is for you. Here, you will get to know the quick and easy methods that will help you to get solved HP laptop not connecting to WiFi Windows 10 issue.
Easy Methods: Solved HP Laptop not Connecting to WiFi Windows 10
When you see the HP laptop won’t connect to WiFi windows 10 issue, that it is time you need to restart your laptop. After restarting your laptop, you can check whether the issue is still present or not. If you can see the issue, then you can use the undermentioned methods to get solved HP laptop not connecting to WiFi Windows 10 problem.
Method 1 – Turn On the Wireless Button
This is one of the reliable methods that you can apply on the system to solve this problem. Every HP laptop has a wireless button that turns On or Off the wireless signal. So at first, you need to check that the wireless signal button is turned On or Off. If it is Off, then you may see this issue. So, at first, turn it On by pressing the wireless button. After that, you have to wait at least 15 seconds, and then check if the LED light is On, and then try to connect to the internet.
Method 2 – Update the WiFi Adapter Driver
An older version of the WiFi adapter driver can cause the HP laptop not connecting to WiFi Windows 10 issue. So, you have to keep the WiFi adapter driver up to date. To do so follow the steps given below:
At first, you need to press the Windows Home key along with the R key to launch the Run box. Type ‘devmgmt.msc’, and then press the Enter button or click on the OK button. Alternatively, press the Windows button and X key to open the Menu list. From that list, you will find the Device Manager, select it.
From the Device Manager window, you have to navigate to the ‘Network adapters’ tab and expand it. In that section, you will get the WLAN card drivers option. If the Wi-Fi network card is not here, then it is possible that it is not installed. You will get it in the ‘Others’ section.
Then, you need to right click on the Network driver to open the list and choose the“Update Driver Software” option. Now, you can see the update process has begun. Once it completes, install it. After completing this, you must restart the system, and then check whether the issue is still there or not.
Method 3 – Run Auto Network Troubleshooter
This is an alternative method that you should use on your Windows 10 device to get solved HP laptop not connecting to WiFi Windows 10 issue. You must try running the Network Troubleshooter. The Windows Troubleshooter examines the Wi-Fi hardware and also checks the internet connectivity by entering Microsoft’s servers. To complete this method follow the directions mentioned below:
You have to hold the Windows Home button and I key to open the Settings window. Alternatively, you need to press the Windows key + R key to launch the Run dialog box. Write ‘Settings’, and then hit the Enter button or click on the OK button.
From the Settings application, you need to double-click on the ‘Update and Security’ section. In that tab, select the Troubleshoot from the left side panel. On the right side page, you will go to the Internet Connections tab and get an option ‘Run the troubleshooter’. In the next window, you can choose the ‘Troubleshoot my connection to the Internet’ option. Once the troubleshooting process gets complete, restart the system and then try to connect the WiFi.
Method 4 -Uninstall the Wireless Adapter Driver and Reinstall It
The incomplete installation process of the wireless adapter driver can cause the HP laptop won’t connect to WiFi Windows 10 problem. So, you need to uninstall it and again, install it on your HP laptop to get rid of this issue. To do so follow the steps cited below:
Firstly, you have to hold the Windows button and press the X key to open the Menu list. Select the Device Manager. Alternatively, go to the Search Panel, type ‘Device Manager’ and then press the Enter button.
When the Device Manager window opens, move the cursor to the Network Adapters option, select it to expand. Then, you must right click on the wireless network adapter to open the list. Select the ‘Uninstall device’ option from that list. Now, you can see a confirmation page will open, click on the Uninstall option.
Once the uninstallation process is finished, install it. So, you need to go to the top menu list and select the ‘Scan for hardware changes’ icon. Now, the laptop will again install the wireless network adapter on your HP laptop and display this in the Network adapters section. After completing all these steps, restart the system, and then check whether the HP laptop connects perfectly to the WiFi.
Method 5 – Verify and Reset the Hardware
This method is also very useful to solve the HP laptop not connecting to WiFi Windows 10 issue. Follow the directions given below:
At first, you need to switch Off your HP laptop by pressing the Power button. When it is turned Off, remove all other devices such as the mouse, printers, and keyboard. Then, you need to disconnect the AC adapter and take out the battery.
Next, you need to tap on the Power button on the system for at least 10 seconds. If you use the router, then disconnect the power cord. If you use the separate broadband modem, then disconnect it. After that, you have to wait for at least 10 seconds and again connect the power cord. After doing this, put the battery into the laptop and connect the AC adapter.
Next, you need to press the Power button to turn On the laptop. Then, select the Start Windows Normally button, and then press the Enter button. When you can see the normal screen, you need to go to the Network icon which is located at the below right side. Right-click on it and you will get an option the ‘Open Network and Sharing Center section’, select it. In that tab, double click on the ‘Change adapter settings’ button.
In the next window, you can check whether your network status is turned On or Off. If it shows Disable, then right-click on it and select the Enable option.
Method 6 – Perform the System Restore
Sometimes, by performing the system restore you can get solved HP laptop not connecting to WiFi Windows 10. Follow the following steps:
Firstly, you need to press and hold the Power button on your laptop for at least 5 seconds. After that, you can see the laptop is On and now, go to the Advanced options section.
In the Advanced Options tab, you need to click on the System Restore button. Then, you have to select the ‘Choose a different restore point’, and then click on the Next option. Once the restore process is done, click on the Finish button.
Method 7 – Update the Windows Operating System
You have to update the Operating System from time to time. If you have not updated, then you can see this issue on your HP laptop. Follow the steps here under:
To open the Settings window by pressing the Windows Home button and I key. Alternatively, press the Windows button and S key to open the Search box, type ‘Settings’, and then press the Enter button.
From the Settings window, you have to double click on the ‘Update and Security’ section. In that section, click on the Update tab, and then click on the ‘Check for updates’ button. Now, the system will check whether the update is available or not. After the verification completes if you can get any updates, then click on the Update button.
Once it finishes, reboot the system, and then check whether the issue still persists or not.
Method 8 – Change the Network Settings
You need to modify the network settings to get solved HP laptop not connecting to WiFi Windows 10 issue. Go through the steps:
You need to go to the Search box, type ‘Create a restore point’, and then hit the Enter button. In the next window, you can see the System Properties window will open. Then, move the cursor to the System Protection section.
When the System Protection tab opens, click on the Create option. Then, enter the name and click on the Create option. Now, the system has created the restore point.
Next, you need to press the Windows button + X key to launch the Menu list. Select the Command Prompt(Admin) option.
In the Command Prompt window, type the following command, and then hit the Enter button after typing each command.
- First is netsh int tcp set heuristics disabled
- Second is netsh int tcp set global autotuninglevel=disabled and
- Third is netsh int tcp set global rss=enabled
Once it is executed, you have to launch the TCP Global Settings. To open this, type ‘netsh int tcp show global’ command in the Command box, and then hit the Enter button. Now, you can see all the TCP settings are turned off but ‘except Receive-Side Scaling State’ option is turned on. After doing this, shut the Command window and restart your HP laptop.